Images are for illustrative purposes only.

Fox Splice-On Connector SC

Availability: In Stock

Fibrefox splice-on connectors provide a convenient low loss alternative to using pigtails to field terminate fibre cable. The ... Read More

New product

£47.40 Inc. VAT

£39.50

Free Super Saver Delivery - on all orders over £10
  • More info

  • Details

  • Spec Sheet

Fibrefox splice-on connectors provide a convenient low loss alternative to using pigtails to field terminate fibre cable. The connector is supplied ready terminated with a  short length of fibre, which can be directly spliced to installed cable. The splice is then protected within the specially designed connector boot, removing need for additional  splice trays or housings. Used in conjunction with Fibrefox Fusion Splicers, the connectors offer a quick to use, high quality, low insertion loss, low return loss , fully compliant solution.

FTTH Last Mile Design, FTTH Architecture

Assembly Procedure
soc_sc_1.jpg1. Pass the cable through the boot and the boot cap. soc_sc_2.jpg2. Strip the indoor cable with a stripper. soc_sc_3.jpg3. Clean the stripped cable with an alcohol soacked tissue.
soc_sc_4.jpg4. Cleave it with a cleaver. soc_sc_5.jpg5. Take the fibre protector off from the ferrule. soc_sc_6.jpg6. Put the ferrule and cable on the V-groove.
soc_sc_7.jpg7. Splice. soc_sc_8.jpg8. Put the spliced connector in the oven, then it will start heating automatically. soc_sc_9.jpg9. Get the heated sleeve cooled.
soc_sc_10.jpg10. Assemble the boot and the cap. soc_sc_11.jpg11. Assemble the housing. soc_sc_12.jpg12. Completed.

  • Compliant with IEX51754-4, KS C6974(F04), JIS C5973(F04)
  • Compliant with Telcrdia GR-326-core
  • Able to terminate the fibre with a connector in the field
  • Jointing point is located inside of the connector
  • Higher quality, better insertion loss and return loss
  • Easy to assemble with one step system
soc_sc_3.jpg
Insertion loss 0.2 dB
Fibre Types 0.9mm fibre, 2.0mm, 2.4mm, 3.0mm cable, 3X2 indoor cable
Return Loss ≤ 50dB
Tensile Force ≥30N(≥3.1kgf) for 3.0mm code or 0.9mm fibre / ≥80N(≥8.0kgf) for 3X2 indoor cable
Repeating Test 500 Cycles, ≤0.2dB
Operation Temp -45⁰C - 85⁰C
Manufacturer FibreFox

1 other product in the same category: