Top sellers
Cat5e UTP PVC Solid Cable Available on a 100mt Reel
CCS Cat5e UTP Cable is designed for high speed LANs including Gigabit Ethernet applications. When used with CCS Cat5e patch panels and modules it gives the exceptional performance required for transmission over all four pairs. The cable is supplied in easy to use 100mt Reels. Cat5e UTP PVC Cable Details: Features: Suitable for Gigabit Ethernet applications PVC outer sheath Supplied metre marked Pure copper cores Excellent performance exceeding ANSI/TIA Cat5e specifications More Info
Cantilever Shelf for Wall Mounted Data Cabinets
These shelves are deigned to fit in the RackyRax Wall Mounted Data Cabinets. Mounting on the front profile to provide a sturdy base to sit your equipment. More Info
MTP Trunk Cables fitted with MTP connectors at each end, made to your...
The CCS Starlight® Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an extremely cost effective, expandable and high speed system. Starlight® utilises MTP® brand pre-terminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Starlight® cassettes and panels. Assemblies are available in 12 & 24 fibres, and micro and ruggedised cable in multimode OM1 62.5/125, OM2 50/125, OM3 50/125, OM4 50/125 and singlemode OS1 9/125 options. The Starlight® System is... More Info
Unloaded 24 Port Shielded Cat6a Keystone Jack Patch Panel
The Connectix 24 Way Keystone Patch Panels offer high density and the capability for 10G data transmission performance levels. Supplied unloaded - the patch panel installation and termination time can be greatly reduced when Connectix Tool-less Snap-to-fit Keystone Modules are used in the panel. To further increase on-site installation efficiency, Connectix Express Pre-terminated and Pre-tested Modules can also be used. Features: Fully shielded High density, 24 ports Suitable for FTP tool-less Keystone Modules Suitable for Connectix Express... More Info
Sachets of Epoxy adhesive used for fibre terminations
A fast setting epoxy adhesive used where optical clarity and/or fast cure rates are needed More Info
Gigabit SFP Media Converter
- Complies with IEEE 802.3ab and IEEE 802.3z- FX port supports hot-swappable- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiberThe MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC-Type connector. The MC220L supports shortwave (SX) laser specification at a full wire speed... More Info
ST Loaded Fibre Patch Panel with Splice Management
This Starlight™ ST Fibre Patch Panel is available with a range of port densities. The fibre patch panels are manufactured from mild steel and finished in a black powder coating. They are suitable for mounting in 19" cabinets. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Fibre Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connect or... More Info
Custom made E2000 Leads made to order
Designed to be the ultimate in optical fibre connectors, the E2000 connectors exceed all standards for performance and operation. These made-to-order E2000 leads are available in all fibre types and also with LC or SC connectors at the other end. The E2000 connectors are available in both multimode and singlemode options. Options: Length - Choose the length for your requirements Cores - Simplex of Duplex Connector Types - E2000, SC & LC Fibre SIzes - 62.5/125 (OM1), 50/125 (OM2), 50/125 (OM3), 50/125 (OM4) & 9/125 (OS1)Features... More Info
SC Fibre Optic Connectors available in Multimode & Singlemode options
The SC connector is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet. The SC connector has set the standard for optical fibre connectors. SC connectors are manufactured using the best quality components and they exceed all areas of the standards covering optical fibre connectors. The one-piece design features pre-radiused ceramic ferrules, and are suitable for use with two part heat curing epoxies and cold cure... More Info
Gigabit Single-Mode Media Converter
- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 15kmThe MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at... More Info
SC Loaded Fibre Patch Panel with Splice Management
This Starlight™ SC Fibre Patch Panel is available with a range of port densities. The fibre patch panels are manufactured from mild steel and finished in a black powder coating. They are suitable for mounting in 19" cabinets. The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes. The panels include a sliding tray for easy access to splices. Fibre Panels are supplied fully loaded and complete with splice management. Unloaded versions and other connect or... More Info
10/100Mbps Multi-Mode Media Converter
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.- Extends fiber distance up to 2kmThe MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports shortwave (SX) laser specification at a full wire speed forwarding rate.... More Info
Fibre Break Out Box, Available with 4, 8, 12, 16 or 24 ST Simplex Adapters
The Starlight™ range of wall mountable break out boxes are designed to provide a cost effective method of patching or splicing in situations where equipment racks or cabinets are not available. The boxes can be supplied fully loaded with all common adaptors including ST, SMA, SC, FC, SC Duplex, FDDI and ESCON types. They are supplied in a number of popular formats including 1in/1out, 1in/2out and 2in/2out. We provide a custom machining service enabling us to supply any other splice box configuration or hybrid enclosures on very short lead... More Info
MiniGBIC, 850nm, Multi-mode Fiber, 1.25Gbps, LC/UPC
The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the demand in order to lower cost. More Info
Individual Syringe and Needle for injecting epoxy in fibre terminations
This syringe comes in a complete package with syringe body 0.9mm needle. This syringe and needle is designed to inject epoxy into the connectors. More Info
FC Adapter for use with Singlemode FC connectors
The FC connector and adaptor set are mainly used for singlemode applications where precision is required. With its simple to use locking threadmechanism preventing accidental disconnection, this provides a very secure connection. More Info