To ensure your fibre installation is of the highest quality and meets all the required speeds and standards we offer a complete range of fibre testing solutions from pocket fault locators to full compliance and certification testers
Features advanced technology, high output, ultra low-power operation. It can work at 1625nm, 1550nm, 1490nm, 1310nm, 1300nm, 850nm, 650nm, single wavelength, dual wavelength or tri wavelength. It can export a variety of modulation frequency (CW, 270HZ, 1KHZ, 2KHZ). It is widely used in optical communication, optical measurement, optical fibre sensing and so on.Features:Single to tri wavelength combination Continuous and modulated signal Real-time display of battery level and lower power indication Back light function Auto off function... More Info
This visual fault locator gives a continuous or pulse of red light.
Refraction of the 650nm red light caused by any breaks and or cracks in the fiber will glow red, thus giving an exact visual location of the fault in the fiber. Features: 2.5mm Adapter built into unit(ST, SC, FC connector) 1.25mm adapter availabe to purchase seperatly (this adapter is shown in picture) Robust and handy design Dust-free cup to protect LD Continuous/Pulse mode options Emitting LD 650 nm visible red light Low voltage battery warning signal in led More Info
All in one solution for multimode and singlemode test requirements.
Designed with installers in mind, 33-960 Series Micro OTDRs offer excellent performance and ease of use in a truly handheld, lightweight andrugged package. Available as either an 850/1300 nm (multimode) or 850/1300/1310/1550 nm (multimode and single mode) OTDR, they are ideally suited for the installation and troubleshooting of LAN, campus and WAN fiber networks. Both models combine high measurement precision with the user friendliness of one-button operation resulting in accurate characterization of connectors and splices in addition to... More Info
Images are captured digitally and streamed on the monitor of any compatible...
The FTTA Smart Probe allows technicians to inspect the fiber endfaces. Images are captured digitally and streamed on the monitor of any Android Tablet or Smartphone. The FTTX Smart Probe is an ergonomically designed, compact, Wi-Fi probe for smart phones and tablets. Featuring integrated Wi-Fi module and left/right handed thumb or finger operation for greater ease of use and convenience. Incorporating high resolution sensor outputting 960 x 544 pixel resolution images at 16:9 aspect ratio, the Smart Probe can easily view two MT/MPO fibers... More Info
Universal 2.5mm ferrule to 1.25mm adaptor
Universal 2.5mm ferrule to 1.25mm adaptor Compatible to SC/ST/FC/LC connectors Visibility to 3 Km More Info
The Senko Smart Cleaners are dry cloth cleaners specially designed to clean...
The Senko Smart Cleaners are dry cloth cleaners specially designed to clean single fiber connectors residing in an adapter, faceplate or bulkhead. The dust cap of the cleaner acts as an adapter for cleaning unmated connectors. The Senko Smart Cleaners for simplex connections are simple to use and highly effective at removing oil and dust contaminants that can negatively impact optical performance. Applications: Fiber network panels and assemblies Outdoor FTTX applications Cable assembly production facility Testing laboratories Servers,... More Info
The Power Meter measures power in both 850 nm (Multimode) and 1310nm ~ 1625nm...
Easy to use, lightweight and designed to fit in the pocket the Senko Smart Power Meter is used in conjunction with the Smart Source to test and certify a fibre link. It is available in both a singlemode (1310/15550nm) and multimode version (850nm). As standard the meter will accept a 2.5mm ferrule connector such as SC, FC, ST. Optional accessories: 2.5mm to 1.25mm adapter suitable for LC connectors Features: Bluetooth Connectivity LED digital display. Universal 2.5mm/1.25mm adaptor available seperatly Mobile App for Android / iOS / Windows... More Info
For use with Singlemode/Multimode Power meter
Universal 2.5mm ferrule to 1.25mm adaptorCompatible to SC/ST/FC/LC/MU connectors More Info
All in one solution for Multimode & Singlemode test requirements.
The FF600 has a large LCD touch screen and short-cut keys to make it very easy to operate. The large-capacity polymer lithium battery gives the device enough power to work for up to 8 consecutive hours. Super-large storage capacity of traces all saved on an SD card. The FF600 is abe to meet FTTx testing needs and several wavelengths can be chosen. Solid casing design means the device is not only durable, it is also dustproof and shockproof. Overall, the FF600 boasts intelligent testing, simple to use and is packed full of powerful functions. More Info
Light Source - pre loaded with SFP plugin modulesWorks in conjunction with...
Light Source is ideal for field or laboratory testing of optical communication systems at 850 nm / 1300 nm for datacom testing, 1310 nm / 1550 nm / CWDM 1270 nm ~ 1625 nm ( 20 nm spans ) for all WDM testing, as well as 1490 nm for FTTx testing by using interchangeable SFP transceiver modules. Light Source features zero warm up time, superb productivity and has an easy to use, pocketsized and rugged design. Features: No pre-warm up time Interchangable SFP module design for wavelenght flexibility High output power stability Excellent... More Info
FiberMASTER provides all the features professionals require to certify and...
Measure fiber optic power in milliwatts (mW) and decibel-milliwatts (dBm) to test and troubleshoot active LANs. Quickly measure cabling loss with the automatic calibration feature that stores reference power from any light source for quick dB loss calculations. Plus, the 1490nm wavelength measurement mode is perfect for troubleshooting emerging Fiber To The Home cabling systems The IDEAL FiberMASTER fiber optic testing kit allows the user to measure absolute power and calculate the loss of fiber optic links at several wavelengths. Absolute... More Info
SFP Plug in Modules for Senko Lightsource
SFP Plug in Modules All modules fit Senko Light source Main frame unit Singlemode & Multimde Modules Avaialble Singlemode FP type Modules Excellent Wavelength Stability Excellent output power stability More Info
Fast Evaporating pre-Moistened Swabs, individually wrapped
Sold in Pack of 100 individually wrapped Fast Evaporating Single Use Pre-Moistened swabs Ideal for removing dirt, dust and oil Approximate size - Folded 30mm x 30mm, unfolded 30mm x 60mm Absorbant fibre-free swabs, contains 70% (IPA) Alcohol Small in size, these are not large handwipes More Info
Network Transmission Tester
If you install, maintain or troubleshoot data cabling and Ethernet networks, SignalTEK NT allows you to prove the performance up to Gigabit Ethernet transmission rates.SignalTEK NT is used to quickly prove that Ethernet will work correctly after installation in cable installations such as SOHO or residential cabling where cable certification is cost prohibitive or where the end customer does not require the cable manufacturer’s warranty programs. Workstation or Laptop has an extremely slow network access. SignalTEK NT can be used to run a... More Info
Data cable transmission tester
Testing of twisted pair data cables to demonstrate that the copper cabling was installed correctly and is capable of supporting Ethernet applications to the IEEE 802.3ab Gigabit Ethernet Standard.Now includes touchscreen The SignalTEK CT issues a PDF report to prove that your installed data cables can carry Gigabit Ethernet traffic at full speed with no errors, and confirms correct wiremap results. Easy to use – Autotest provides proof of cable performance in seconds. IDEAL AnyWARE app - Send PDF reports from anywhere. Real world testing –... More Info