Compatible with Cisco SMB MGBT1Form Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No

Compatible with Brocade/Ruckus E1MG-LX-OMForm Type: SFPData Rate: 1000BASE 1.25GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes

Compatible with Brocade/Ruckus E1MG-SX-OMForm Type: SFPData Rate: 1000BASE 1.25GbpsWavelength: 850nmDistance: 550mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes

Connectix Category 5e UTP Cable is designed for high speed LANs including Gigabit Ethernet applications.The Cca LSZH sheath offers excellent fire performance making this the ideal choice in public buildings and other high risk locations, exceeding the requirements of BS6701:2016+A1:2017 for installation cables.When used with Connectix Category...

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard LC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives, the XP Fit Plus makes field installations quick and easy, eliminating the...

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard SC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives,the XP Fit Plus makes field installations quick and easy, eliminating the...

Light Source is ideal for field or laboratory testing of optical communication systems at 850 nm / 1300 nm for datacom testing, 1310 nm / 1550 nm / CWDM 1270 nm ~ 1625 nm ( 20 nm spans ) for all WDM testing, as well as 1490 nm for FTTx testing by using interchangeable SFP transceiver modules. Light Source features zero warm up time, superb...

Unloaded ST panels come with the holes drilled out for the ST adapters, the fixing bracket and screws are also included.

Our singlemode fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for datacomms and CATV applications. The leads are manufactured in our advanced fibre termination facility under stringently controlled quality conditions. Our termination facility is one of the largest in the UK...

Our range of Connectix LC to SC fibre patch leads are manufactured in-house, are 100% tested and certified and surpass the high standards required for exceptionally fast data applications. These LC - SC FIbre leads are available in multimode OM1 (62.5/125), OM2 (50/125), OM3 (50/125) and OM4 (50/125) specifications. Our fibre cables are...

The Connectix range of wall mountable break out boxes are designed to provide a cost effective method of patching or splicing in situations where equipment racks or cabinets are not available. The break out boxes are available in tough and lightweight ABS or mild steel for more demanding situations. The boxes can be supplied fully loaded with...

- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743