Fibre Networking (384 products)

Unloaded ST Fibre Patch Panel

Unloaded ST panels come with the holes drilled out for the ST adapters, the fixing bracket and screws are also included. More Info

1000BASE-T SFP RJ45 100m Cu. Fully compatible with Cisco SMB MGBT1

Compatible with Cisco SMB MGBT1Form Type: SFPData Rate: 1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

Light Source - pre loaded with SFP plugin modulesWorks in conjunction with...

Light Source is ideal for field or laboratory testing of optical communication systems at 850 nm / 1300 nm for datacom testing, 1310 nm / 1550 nm / CWDM 1270 nm ~ 1625 nm ( 20 nm spans ) for all WDM testing, as well as 1490 nm for FTTx testing by using interchangeable SFP transceiver modules. Light Source features zero warm up time, superb productivity and has an easy to use, pocketsized and rugged design. Features: No pre-warm up time Interchangable SFP module design for wavelenght flexibility High output power stability Excellent... More Info

10/100/1000BASE-T SFP RJ45 100m Cu. Fully compatible with Ubiquiti UF-RJ45-1G

Compatible with Ubiquiti UF-RJ45-1GForm Type: SFPData Rate: 100/1000BASEWavelength: N/ADistance: 100mConnector: RJ45Fiber Type: Copper Cat5Operating Temperature: 0~70 CDOM Supported: No More Info

10GBASE-SR SFP+ 850nm MMF 300m LC. Fully compatible with Cisco Systems...

Compatible with Cisco Systems SFP-10G-SRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 850nmDistance: 300mConnector: Dual LCFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

XP Fit Plus SC Field Installable Connector

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard SC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives,the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site. Please Note: The connectors no longer come with the 'Jig', if required, this needs to be purchased separately. Features:Epoxy-free crimp... More Info

XP Fit Plus LC Field Installable Connector

The XP Fit Plus is a pre-polished, pre-assembled connector compatible with the standard LC connector. In place of epoxy, an internal mechanical grip gently but effectively holds the fibre in place and can be installed in under two minutes. Without polishing or adhesives, the XP Fit Plus makes field installations quick and easy, eliminating the need for epoxy curing and hand polishing at the work site.  Please Note: The connectors no longer come with the 'Jig', if required, this needs to be purchased separately.   Features: Epoxy-free crimp... More Info

Connectix tight buffered distribution cable can be used for many indoor and outdoor applications. Typical cable applications include: LAN and WAN backbones, tray pathways and backbones in data centres.The outer sheath features an UV stabilised, water and moisture resistant LSZH jacket making the cable well suited for shorter outdoor runs.This cable features high flame retardance with a CPR EuroClass rating of Cca-s1a-d0-a1 and exceeds BS6701:A1 minimum requirements.When installed as part of an end-to-end Connectix Cabling System, a 25-year... More Info

10GBASE-LR SFP+ 1310nm SMF 10km LC. Fully compatible with Cisco Systems...

Compatible with Cisco Systems SFP-10G-LRForm Type: SFP+Data Rate: 10G 10.3125GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

10GBASE-T SFP+ RJ45 30m Cu. Fully compatible with Extreme 10338

Compatible with Extreme 10338 More Info

10 Gigabit LR SFP+ Module

- Adds 10 Gigabit Ethernet "long-reach" LC fiber connectivity to the standard SFP+ interfaces- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743 More Info

125GBASE-SR SFP28 850nm MMF 100m LC. Fully compatible with Arista SFP-25G-SR-AR

Compatible with Arista SFP-25G-SR-AR More Info

25GBASE-LR SFP28 1310nm SMF 10km LC . Fully compatible with Mellanox MMA2L20-AR

Compatible with Mellanox MMA2L20-AR More Info

40GBASE-SR4 QSFP+ 850nm MMF 150m MTP. Fully compatible with Dell Networking...

Compatible with Dell Networking 430-4593Form Type: QSFP+Data Rate: 40G 41.25GbpsWavelength: 850nmDistance: 150mConnector: MPOFiber Type: MMFOperating Temperature: 0~70 CDOM Supported: Yes More Info

Fibre Break Out Box, Available with 4, 8, or 24 LC Duplex Adapters

The Starlight™ range of wall mountable break out boxes are designed to provide a cost effective method of patching or splicing in situations where equipment racks or cabinets are not available. The break out boxes are available in tough and lightweight ABS or mild steel for more demanding situations. The boxes can be supplied fully loaded with all common adaptors including ST, SMA, SC, FC, SC Duplex, FDDI and ESCON types. They are supplied in a number of popular formats including 1in/1out, 1in/2out and 2in/2out. We provide a custom machining... More Info

40GBASE-LR4 QSFP+ 1310nm SMF 10km LC . Fully compatible with Dell Networking...

Compatible with Dell Networking 430-4917Form Type: QSFP+Data Rate: 40G 41.25GbpsWavelength: 1310nmDistance: 10kmConnector: Dual LCFiber Type: SMFOperating Temperature: 0~70 CDOM Supported: Yes More Info