This CCS Fast Ethernet 100Base-TX to Fiber 100 Base-FX converter features one fiber port with SC connector. It converts electrical signal from 100Base-TX side into optical signal at 100Base-FX side and vice versa. Features: Support 100BaseT Ethernet UTP Standalone or composite application Full-or Half-duplex mode

This is a Fast Ethernet 100Base-TX to Fiber 100 Base-FX converter. This model features one fiber port with ST connector.  It converts electrical signal from 100Base-TX side into optical signal at 100Base-FX side and vice versa. Features: Support 100BaseT Ethernet UTP Other available fiber connectors: SC/MT-RJ/VF-45 for multi-mode and...

The SC adaptor is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a telecoms distribution room to a Local Area Network closet. 

Connectix have developed a cost effective pre-terminated cabling system called OPAL™ (Optical Pre-Assembled Link) which is completely based around standard networking products. The system allows a fibre optic network to be installed in a fraction of the time taken by conventional on-site direct termination or fusion splicing. It requires no...

Starlight™ SWA Uni Tube Fibre Cable is suitable for direct burial installations making it the perfect solution for the most demanding and harsh environments.  The SWA fibre cable has excellent tensile strength and the layer of 0.9mm steel wire provides safe rodent protection.  The fibre cable core consists of a central gel filled polyester...

The Connectix range of sliding patch panels are available with a wide range of adaptor types and populations. The panels are manufactured from mild steel and are finished in a black powder coating.The panels feature fully adjustable mounting brackets, numbered adaptor ports and a range of panel knock-outs to suit common gland sizes.The panels...

The Starlight™ Multi-purpose Uni-loose Tube Distribution Fibre Cable provides a cost effective solution to all internal or external fibre cabling requirements, particularly where on-site fusion splicing of pigtails is the preferred termination technique. The cable consists of a single central uni-tube containing individually colour coded 250μm...

Spotlight:- WDM Bi-Directional SFP Module- Supports WDM Bi-Directional technology, using a single strand of fiber, cost savingTP-LINK´s TL-SM321B adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up to 10Km with TP-LINK´s...

The TL-SM311 series Fiber Module Cards are introduced for extending transfer distance. Attached to our managed/smart switches, they can extend the distance to several kilometers even tens of kilometers which can basically satisfy the distance requirement of LAN. Users can choose whether and which items to use the fiber modules according to the...

- Complies with IEEE 802.3ab and IEEE 802.3z- FX port supports hot-swappable- Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiberThe MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z...

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 15kmThe MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards,...

- Complies with IEEE 802.3ab and IEEE 802.3z- Provides switch configuration of Force /Auto transfer mode for FX port.- Extends fiber distance up to 0.5kmThe MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the...